1" Bore Master Cylinder Starter Kit w/ 90 Degree 3/16" Brake Lines and Residual Valves

You may not realize it, but bending brake lines a perfect 90 degree off the master cylinder is harder than it seems.  This kit makes it easy with two 90 degree 3/16" brake hard lines with 3/8"-24 IFM thread nuts on each end.  A 1" bore Corvette style dual reservoir master cylinder works great with a disc / disc or disc / drum combination, with or without a brake booster.  We also include one 2 psi residual valve, and one 10 psi residual valve for customers who are running disc brakes on the front, and drums on the rear.  This kit is a great start to building your brake system! 

Kit Includes-

• 1" Bore Master Cylinder with 3/8-24 outlets (two on each side)
• Two 3/8-24 plugs to block the master cylinder outlets not used
• Two 90 Degree 3/16 steel brake hardlines with 45 degree 3/8-24 IFM thread nuts
• One 2 PSI residual valve for disc brakes with two 3/8"-24 thread nuts
• One 10 PSI residual valve for drum brakes with two 3/8"-24 thread nuts