Orders are currently at a 6 week waiting period.
As of August 1st,2022. All body kit will no longer come with body cushions, below is a link to energysuspesion.com with the part we recommend.
Free Shipping on this S-10 chassis swap kit within the continental USA!
While actively participating in the streetrod aftermarket industry for many decades, Code 504 has recognized a need for a quality S-10 bolt-on conversion kit and accessories to finish the project from A to Z. If you want your 1947-1954 Chevy short box truck to drive like a modern vehicle but don't want to spend thousands of dollars for an aftermarket frame, our bolt-on S-10 chassis upgrade conversion is a great solution for a common problem. All bolt-on S-10 conversion kits are proudly made in the USA by Code 504 in Seward, NE, and have been engineered to provide a quality and enjoyable installation ranging from the beginner to the seasoned expert.
Each kit features the following components:
- Rear frame crossmember
- Shock bar
- CODE504 branded Camel hump crossmember
- CODE504 branded Front box mount
- Rear cab mount
- Transmission mount
- Transmission cross brace
- Driverside front cab mount designed to accept SKU#50400103 Under Floor Pedal
- Chevy Motor mount kit
- Inner Fender Support Braces
- Grill mount
- Front bumper brackets
- Rear bumper brackets
- Front cross brace for bumper brackets
- Passenger side front cab mount
- Front running board mounts
- Center running board mounts
- Rear running board mounts
- Rear box mounts
- All necessary hardware
- Detailed step-by-step instructions (with pictures) and friendly, unlimited tech support!
- No Welding Required! 100% Bolt-On Design for easy installation!
- Designed using SolidWorks 3-D Modeling Software
- Manufactured with laser cut brackets and CNC bends for quality and consistency
- All kits ship with raw finish but can be powder coated for a small fee
- *S-10 Frame Not Included
- This 47-54 Chevy Truck kit requires an S-10 donor frame that's from a standard cab S-10 2wd pickup with a long box (118" wheelbase)
- Swapping to an S10 will typically drop the overall height 2 1/2 inches from the original truck height.
Disclaimer: All pictures are shown for illustration purposes only. Actual product may vary due to product revisions and/or enhancements.
Notes: Some installs require changing of A/C, P/S, and Alternator Brackets depending on engine choice. Headers also may have limited options.
Motor and Transmission combos can vary greatly on where the transmission will sit. Powerglides, T350, and T200s have roughly the same distance from housing to mount. Most others with exception to the 4L80 will fall in the range of the 700R4. Please know what transmission you are using when selecting your motor mount combination.
We're always happy to answer any questions you may have. Feel free to give us a call at 402.643.0504 or send us an email at firstname.lastname@example.org!
Showing reviews 1-10 of 20 | Next
Chassis frame kit
Posted by Jason on 15th Dec 2021
Quality product. Fit and finish is nice. Can’t wait to get it installed and see the finished results. Thanks
Product Great, Packaging not so much.
Posted by CL Fairbanks on 24th Nov 2021
This is a well designed and produced product, The packaging however is not as good. Heavy steel parts with precisely cut edges may need a little stronger boxes. Some of the boxes were crushed and had holes in them. Two of the packing lists were almost destroyed and I was missing two parts. 504 sent those parts after one phone call. I have and will continue to suggest this product to friends . I have only just started my mock up ( due to surgery) however from what I see I am going to be very happy with my 504 frame swap kit.
Ready to install ‘54 body...
Posted by Scott Stanfield on 15th May 2021
This kit is impressive. The pieces are stout and the instructions are straight forward. My frame is a 2002 s10 and required a few deviations, but staff quickly answered any questions I had. I’m using the stock 4.3l and AT. As of writing this review, all the pieces have been installed. This review will be updated after the ‘54 body is installed.
Well made. Simple and to the point.
Posted by Phil on 12th May 2021
I had no problem assembling the kit. Came with a great instruction manual.
Posted by Charles Prejean on 14th Jan 2021
Very well made. Good instructions. Would definitely recommend it!
Posted by PETER MCNERNEY on 19th Feb 2020
it was easy and straight forward to install. instructions were clear. i would like to see you guy make a batteries frame notchout kit for the s10 so we could put the battery in original location on a 47-55. im fabing my own it should be pretty easy but would be better if you guys engineered it an cnc the pieces. thanks
Posted by Dids999 on 9th May 2019
Well made, easy to install, great customer service +++
Making memories and family time
Posted by Frank Hettich on 3rd Aug 2018
Having fun watching this project come together working with my son on it priceless
Posted by Amanda on 20th Apr 2018
This company is fantastic to work with. Very impressed with the packaging, parts, lables, and instruction booklet. With the detailed instructions, just about anyone could assemble all these brackets. I liked the fact that they have a customer service number to call if you need help, and honestly I thought I would be calling several times. I havent needed to call once. If you are even slightly debating on going this route, it is well worth the money!
Posted by anthony on 10th Feb 2018
recently purchased this kit and was really impressed of how they package everything in the boxes .
the parts are well designed and made strong .the booklet they gave you is well detailed with all parts numbered for easy installation .i give these guys 100% for good product and one really satisfied customer
Showing reviews 1-10 of 20 | Next
We stand behind all of our S-10 swap kits with a lifetime warranty, and unlimited technical support by phone or email.