Brake Line Brass Tee with Fittings 3/8"-24 and 1/8" NPT to AN-3

This brass brake line tee kit is commonly used to mount on the rear end.  It accepts an AN-3 stainless flex line traditionally routed from the frame, and transitions to hard line at the tee, which is then routed to the rear brakes.

This kit includes-

• One 3/8"-24 brass tee with 1/8" NPT center female inlet and two 3/8"-24 female outlets
• Two 3/8"-24 inverted flare nuts for 3/16" brake line
• One straight 1/8" NPT to AN-3 adapter